Industrial Testimonials
Ultraspin, Australia
"We used Nanslate paint last year to paint a 5M(2) heated stainless steel tank which is
positioned outdoors at a company in Cobden. This tank is used for melting butterfat.
We achieved a measurable difference in the contents of this tank ... The outside of the
tank was previously too hot to touch. With three coats of Nansulate applied, the touch
was now warm to touch and there was a visual improvement to the melting efficiency of
the product inside. We are very happy with the performance of Nansulate and intend on
using it to paint future tanks."
Regards,
David Morabito
Project Engineer
Ultraspin Technology Pty, Ltd
www.ultraspin.com.au
--------------------------------------------------------------------------------
H H Robertson (Thailand) Company Ltd.
"Dear Sir, We wish to confirm that H H Robertson selected Nansulate™, for the coating
the ceiling panels supplied to the air link bridges, at Suvanabhumi International airport,
Bangkok.
H H Robertson pride themselves on supplying quality products to the construction
industry. This means they work with quality suppliers and after a long and extensive
investigation selected Nansulate™ over all other coating systems, because it was the
only product that met our stringent technical requirements. Once of the key issues that
induced H H Robertson to select Nansulate™, was that the suppliers were prepared to
support the product with a warranty."
Your faithfully,
Chris Moor
General Manager
H H Robertson (Thailand) Co., Ltd
Residential Testimonials
We love what your paint has done for our back bedroom. It was not insulated and
remained hot in the summer even with two a/c vents blowing into the room. Now, it
remains 72 degrees when the sun is beating down on the roof and the outside temp
registers 106 degrees! Amazing!"
Mary McLerran
Salt Lake City, Utah
--------------------------------------------------------------------------------
"Being a civil-engineer working in the environmental field I was naturally skeptical
when I stumbled upon the nano-tech website. I was looking for duct insulation for my
home and instead I feel as though I found the "holy grail." I have limited time but
have been applying HomeProtect ClearCoat to my finished attic , wood exterior
doors, and a couple of old skylights and windows.
The last three months (May, June, July), I have used 40%, 40%, and 50% of the
electricity I used last year during the same months. This is our hottest time of the
year. The window over my tub does that I coated, not condensate during showers as
it is no longer a
cooler surface than the shower.
The other day, I left out of town for work so I turned off my air conditioning before I
left. The highs while gone were in the 80s with 90% humidity. I was amazed after
returning home when I went upstairs in the finished off attic to find it cooler than the
main floor. What amazed me more was when I remembered that the air conditioning
was off and had been for 2 days.
After I turned it on, it finally came on at 10:45 at night for about 5 minutes. That was
it! The lows at night have been in the mid to upper 70's is all. I've told my family,
friends, place of employment, and even the Public Works Department for the city I
live in. I believe this product could help tremendously in the fight against global
warming. I recommend it to any and everyone."
Dave
Davenport, IA 52803
--------------------------------------------------------------------------------
"FYI I am in the end stages of building a 4000 sq ft house which is why I stumbled on
the nanotech in the first place.When I saw the possibilities, I knew if it really worked it
would revolutionize the insulation industry; and I was waiting for the real test and that
was the first heating bill for the coldest month of the year, and it was $43.00. I am
heating this house with one 5ton heat pump unit. Something the heat and air people
told me I could not do. I was ecstatic when I saw that bill. I can now really believe in it,
because I know it works."
Best Regards,
Rosemarie Patterson, Seligman, MO
--------------------------------------------------------------------------------
Products used: Nansulate® Translucent GP, NanoPrime
Application: "On copper hot water pipe, on the interior of the galvanized pool walls,
on the bathroom waste pipe where it is exposed as it penetrates the exterior wall and
is above grade and freeze line."
How Nansulate® Helped: "I was able to insulate the inside of the galvanized pool
walls and the concrete bottom prior to installing the liner as opposed to using a rigid
foam insulation glued to the outside of the walls. This process gets the insulation at
the source of heat loss instead of on the opposite side which would allow heat
transfer via the exposed and uninsulatable wall areas.
1. Saved time,
2. Much more thorough application,
3. No insulation areas exposed to possible damage or accidental removal.
4. No excess mess to clean up.
5. Able to insulate otherwise uninsulatable concrete floor of pool."
Sam Bittinger
CSR
Virginia, USA
--------------------------------------------------------------------------------
Product used: Nansulate® Translucent GP
Application: "My wife breeds and shows rabbit as a hobby - your product
was used to paint the interior of the building where her show rabbits are kept."
How Nansulate™ Helped: "Rabbits have little tolerance for high heat and keeping
them cool during the summer months can be a major challenge. The building was
noticeably cooler during the last heat wave which included record high
temperatures."
Tim Elliott
Garden City, MO
--------------------------------------------------------------------------------
Application: "On an 1800 s.f. second story ceiling immediately below the attic - also
along the borders of north-facing windows. NOW earlier this summer I had our
company (Arden) paint our lab facility in Sanford, NC with both primer and GP.
Again, we're going to find out this winter if it keeps that room a little warmer. But I
have told tons of people at Arden about it, and written an article for the company
internal web site - which I'd be happy to share with you. I've also told dozens of other
people about it - parents of our kids' friends, relatives, my son's 6th grade science
teacher (she wants to try it on her 2nd story addition), and everybody at a
Zingerman's business seminar in Ann Arbor...In fact, I'm going to email everybody
your website now that I've seen that this really does work for myself (read below)"
How it Helped: "Well, I just put it up yesterday, so I don't know the impact yet on our
use of natural gas for the coming winter BUT...I tested in on our hot water heater this
weekend, painting part of the vent pipe coming out of the heater. I realize it takes 30-
60 days to cure, but there was an IMMEDIATE difference in temp. between the part
of the pipe I coated and the part I hadn't. AMAZING! I could NOT touch the uncoated
pipe. I COULD touch the coated pipe. I measured with a digital thermometer and
there appeared to be a 10-20F difference."
Other Comments: "Though the results aren't in yet, I am thrilled already. The heat
test on my water heater PROVED that this really does insulate! I was also delighted
with HOW EASY it was to coat my 2nd story ceiling yesterday. I had called
professional painters to quote doing the job. Then I went to Lowe's and bought $200
worth of wall coverings, drop cloths, rollers and all kinds of painbt stuff and spent 45
minutes taping off a bathroom.l As I was painting I realized that because the viscosity
of Nansulate is a little on the thick side, it really doesn't drop much. So I simply
started doing the rest o the 2nd story WITHOUT all the drop cloths. I didn't need it!
In the end, all I really did was swab off the ceilings with a big mop, then roll on
Nansulate with an extended length roller. I never even needed a ladder. I had
everything done in three hours. I saved on hiring a painter and am going to return
$150 worth of stuff to Lowe's today. I would be DELIGHTED by the way to speak or
write more on behalf of your product about my experience already OR after I see the
impact on our natural gas usage this winter. CONGRATULATIONS on a fascinating,
really cool Product!!!"
Emmon Scott, Arden Companies, Southfield, MI
--------------------------------------------------------------------------------
Product Used: Nansulate® Translucent GP
Application: “This application included three projects.
I applied four coats of GP on the copper pipe coming out of our tankless water
heater. Two months after the application, the pipe feels warm instead of hot to the
touch when we run the water. It also cuts the time for warm water to get to a faucet if
we have run it recently, because water stays warm in the pipes longer than before.
I also applied GP to the hot air ducts that come out of our furnace. Our furnace
room is vented to the outside, so warmth in the ducts would escape into the room
between each furnace run, and the fan would blow the cold air into the house every
time the furnace came on. Two months after applying Nansulate GP to the ducts,
there is no initial blast of cold air from the vents when the furnace kicks on, unless
the system has not run for several hours. Application in this project was easy and
appears to be durable.
The third project was applying three coats of GP to the north and east facing walls
of the outside of my brick house. I applied it to the outside of my brick wall because
insulation applied outside allows us to take advantage of the thermal mass of the
brick, hopefully slowing down the response of the interior temperature to big
temperature swings outside. Application in this case was not very easy, because I
had to apply it to the mortar gap between the bricks as well as to the bricks. Over a
month after the application (now December), the interior walls are noticeably warmer
within the coated walls than inside uncoated walls. I will not know for sure the extent
of any energy savings for several months, but our November natural gas usage was
smaller than last year although the weather was similar.“
Paul Roundy, Colorado
--------------------------------------------------------------------------------
Product used: Nansulate® Translucent GP
Application: "I recently re-roofed my bungalow style house and added a skylight,
ridge vents and soffit vents for a good ventilating air flow from the eaves to the
peak. Inside I removed the old ceiling and attic insulation opening up part of the
house with a "cathedral" ceiling and making a sleeping/ storage loft over the rest. I
sheathed the inside of the roof rafters with furniture grade birch plywood and sealed
this with translucent Nansulate GP."
How Nansulate™ Helped: “This allowed me to maintain maximum ventilation for the
roof ( as opposed to the foam air channel attachment were I to use traditional pink
insulation) with an easier application and also maximizing the beauty of the birch
wood grain . Having added a good amount of cubic space to the house, I am
incredibly impressed with the insulation effects I witnessed just last night when we
had our first frost here on long island and I was able to maintain an inside
temperature of 68 degrees with only a small woodstove. The boiler never turned on
and it was set at 65 degrees.”
Roy Kortick, artist, New York
PRODUCT SELECTOR
 | |  | |  | |  |
| North Bay Nano |